Find JCB reach lifts, used reach lifts, reach lifts, teletrucks, used Teletruks, lift trucks and
construction equipment at APM&S, with locations in Phoenix, Chandler, Buckeye, Casa Grande, Arizona

The JCB Teletruk is unique in its ability to combine the traditional values of small working footprint with very high load carrying capacity, along with new ways of improving materials handling in many industrial applications.  The range includes two-wheel drive machines and machines equipped with four-wheel drive to cope with less than ideal ground conditions and gradients.

FORWARD REACH

• Single side loading, saving up to 50% loading space in congested yards.
• Reaching over obstacles in busy storage yards.
• Reach into cargo-type vans reducing risk of damage.
• Reach into ships, ferries and rail cars from docksides and platforms.
• Remove operators from hazards loading conveyors, furnaces, bailers etc., at reach.

VERSATILLITY

• Change between a variety of 3,000+ industrial attachments in minutes.
• Change from forklift to small wheel loader by fitting a GP bucket - 2 in 1.
• 111 degrees of carriage rotation for tipping carriage mounted GP buckets - no extra hydraulics required.
• 2 and 4 wheel drive to cope with the most difficult surfaces.
• Negative lift as standard for reaching below ground level.

SAFETY

• Excellent visibility of fork tips during loading when fully retracted, also when working inside containers. No mast improves forward visibility which is second to none.
• Particularly beneficial when loading in fully retracted and lowered position. Slimline boom for maximum fork tip visibility.
• Cab enclosure is much more robust than on any lift truck with a mast. ROPS and FOPS operator enclosure.
• There are none of the safety concerns associated with masted lift trucks if lift chains fail. TLT has hose burst check valves as standard.

INNOVATION

• Changezee - Change from bucket to forks in 20 seconds without leaving the cab.
• JCB introduced four-wheel drive to industrial counterbalanced fork lift trucks, giving opportunities beyond the capability of ordinary masted machines.
• High-lift - Increased maximum lift height to 203 inches. 
• High-lift - Maximum forward reach up to 130 inches. 
• Telescopic boom provides the unique ability to load and offload at reach with a compact industrial counterbalanced lift truck.

COST OF OWNERSHIP

• Teletruk can reduce the customer's machine fleet holding
• One teletruk can sometimes do the work of one, two or three machines on site.
• Teletruk's forward reach eliminates the need for expensive and often heavy 'scissor type' load extenders required by ordinary master lift trucks.
• Single side loading saves time, space and money.
• Teletruk telescopic boom design eliminates expensive safety checks to lift chains and rollers on ordinary lift trucks and the expense of replacing these regular wear-parts particularly when loading abrasive materials, i.e., sand, cement and aggregates.

FORWARD REACH

• Single side loading, saving up to 50% loading space in congested yards.
• Reaching over obstacles in busy storage yards.
• Reach into cargo-type vans reducing risk of damage.
• Reach into ships, ferries and rail cars from docksides and platforms.
• Remove operators from hazards loading conveyors, furnaces, bailers etc., at reach.

VERSATILLITY

• Change between a variety of 3,000+ industrial attachments in minutes.
• Change from forklift to small wheel loader by fitting a GP bucket - 2 in 1.
• 111 degrees of carriage rotation for tipping carriage mounted GP buckets - no extra hydraulics required.
• 2 and 4 wheel drive to cope with the most difficult surfaces.
• Negative lift as standard for reaching below ground level.

SAFETY

• Excellent visibility of fork tips during loading when fully retracted, also when working inside containers. No mast improves forward visibility which is second to none.
• Particularly beneficial when loading in fully retracted and lowered position. Slimline boom for maximum fork tip visibility.
• Cab enclosure is much more robust than on any lift truck with a mast. ROPS and FOPS operator enclosure.
• There are none of the safety concerns associated with masted lift trucks if lift chains fail. TLT has hose burst check valves as standard.

INNOVATION

• Changezee - Change from bucket to forks in 20 seconds without leaving the cab.
• JCB introduced four-wheel drive to industrial counterbalanced fork lift trucks, giving opportunities beyond the capability of ordinary masted machines.
• High-lift - Increased maximum lift height to 203 inches. 
• High-lift - Maximum forward reach up to 130 inches. 
• Telescopic boom provides the unique ability to load and offload at reach with a compact industrial counterbalanced lift truck.

COST OF OWNERSHIP

• Teletruk can reduce the customer's machine fleet holding
• One teletruk can sometimes do the work of one, two or three machines on site.
• Teletruk's forward reach eliminates the need for expensive and often heavy 'scissor type' load extenders required by ordinary master lift trucks.
• Single side loading saves time, space and money.
• Teletruk telescopic boom design eliminates expensive safety checks to lift chains and rollers on ordinary lift trucks and the expense of replacing these regular wear-parts particularly when loading abrasive materials, i.e., sand, cement and aggregates.

FORWARD REACH

• Single side loading, saving up to 50% loading space in congested yards.
• Reaching over obstacles in busy storage yards.
• Reach into cargo-type vans reducing risk of damage.
• Reach into ships, ferries and rail cars from docksides and platforms.
• Remove operators from hazards loading conveyors, furnaces, bailers etc., at reach.

VERSATILLITY

• Change between a variety of 3,000+ industrial attachments in minutes.
• Change from forklift to small wheel loader by fitting a GP bucket - 2 in 1.
• 111 degrees of carriage rotation for tipping carriage mounted GP buckets - no extra hydraulics required.
• 2 and 4 wheel drive to cope with the most difficult surfaces.
• Negative lift as standard for reaching below ground level.

SAFETY

• Excellent visibility of fork tips during loading when fully retracted, also when working inside containers. No mast improves forward visibility which is second to none.
• Particularly beneficial when loading in fully retracted and lowered position. Slimline boom for maximum fork tip visibility.
• Cab enclosure is much more robust than on any lift truck with a mast. ROPS and FOPS operator enclosure.
• There are none of the safety concerns associated with masted lift trucks if lift chains fail. TLT has hose burst check valves as standard.

INNOVATION

• Changezee - Change from bucket to forks in 20 seconds without leaving the cab.
• JCB introduced four-wheel drive to industrial counterbalanced fork lift trucks, giving opportunities beyond the capability of ordinary masted machines.
• High-lift - Increased maximum lift height to 203 inches. 
• High-lift - Maximum forward reach up to 130 inches. 
• Telescopic boom provides the unique ability to load and offload at reach with a compact industrial counterbalanced lift truck.

COST OF OWNERSHIP

• Teletruk can reduce the customer's machine fleet holding
• One teletruk can sometimes do the work of one, two or three machines on site.
• Teletruk's forward reach eliminates the need for expensive and often heavy 'scissor type' load extenders required by ordinary master lift trucks.
• Single side loading saves time, space and money.
• Teletruk telescopic boom design eliminates expensive safety checks to lift chains and rollers on ordinary lift trucks and the expense of replacing these regular wear-parts particularly when loading abrasive materials, i.e., sand, cement and aggregates.